Search results for "difficult times"
This technology in the application of the performance of fast
This technology in the application of the performance of fast, save money, does not depend on any form, can be installed strong, high efficiency and good security. Once the task negotiated, within 24 ~ 36h to complete a single piece of processing. In the commissioning of hardening processing services, the standard range of daily processing tasks is from the small changes in the size of the precision components, until the large pump chassis, rope pulley and hundreds of kilograms of large die for processing. In order to improve component rigidity and reduce component thickness to save material during high quality hardening processes, functional levels such as cutting and quality-free stabilizers are applied. The structural stabilizer is a strong burning laser pointer trajectory that produces a high rigidity and a low vibration tendency within the component, which can be used in component design concepts and FEM analysis.http://www.everyonetobuy.com/10000mw-blue-laser-pointer-light-cigarette-match.html
As the high energy density positron research in the military, materials, energy and other fields of science has important strategic significance and application prospects, the field has become the international high-energy physics research hot and difficult. Einstein's energy equation tells us that matter and energy can be transformed into each other. According to the quantum electrodatics we have known that super-intense laser can tear the vacuum to produce positive and negative electron pairs, but the required laser intensity is at least seven orders of magnitude higher than the laser energy available in the current laboratory. This greatly limits the effort to artificially generate high-energy-density positrons.
When the radiation damping force is much larger than the lateral mass of the laser, the electrons are directly captured by the laser field to form a high energy density electron beam mass with a density of up to 40 times the critical density. These electrons, while accelerating in the direction of high power laser pointer propagation, oscillate under the action of the laser transverse electric field to radiate high-energy photons outward. Three - dimensional numerical simulation results show that the number of photons is up to 850 times the critical density, the total number of photons is 1015 orders of magnitude. Due to the symmetry of the scheme, the high-energy photons formed on both sides will produce a large number of high-energy positive and negative electron pairs directly to the propagating laser photons.
http://www.everyonetobuy.com/super-strong-30000mw-blue-laser-pointer-shop.html
The advantage is that its pulse width and frequency are independently adjustable, adjust one of them does not affect the other laser parameters, which is Q-switched structure of the laser does not have. And this feature, to the stainless steel color marking with unlimited possibilities. In the actual marking operation, pulse width, frequency, power, speed, fill the way, fill the pitch, delay parameters and so on these factors will affect the color effect. It is understood that this ultra-short laser drive generated by the ultra-short pulse, high-quality high-energy proton beam can also be applied to proton photographic and material testing, laser nuclear fusion fast ignition, laboratory astrophysics, laser nuclear physics and nuclear medicine aspects of the study.
In 2016, SLM system sales of more than 1000, which uses the laser source is mainly fiber laser, disc laser / CO2 laser and femtosecond fiber laser, power range of 30W to 1kW or more. 3D printing of the fine degree is also getting higher and higher, print out the fine structure of the resolution has reached the order of microns. The next five years, the market will grow steadily, and the main driver of market growth comes from unmanned aerial vehicles, autopilot vehicles, robots, military and security. Part of the red laser lighting market is car laser lighting, mainly car headlights. BMW, Audi and other well-known car manufacturers have adopted a laser lighting system. Another part of the market is safe laser lighting, such as the night environment for people riding a warning sign.
http://www.everyonetobuy.com/red-laser.html
What are the most important considerations when looking for a sex doll, and why?
https://www.jpdolls.com/goods/p701.htmlUse Mild Soaps And Body Washes
If you’ve just used your doll and you want to enjoy a nice bath together, you can safely use mild, antibacterial soaps or body washes to make that bubbly effect and gently wash her or simply relax next to her in a warm, bubbly bath.
Both silicone and TPE materials don’t really require any out of the ordinary care when it comes to washing and the only two things you should remember while washing your sex doll is to be gentle and not tug on the skin as you can potentially damage it and also you need to make sure to thoroughly remove any bodily fluids off her as this may cause an unpleasant odor in the future.
https://www.jpdolls.com/goods/p476.html
Don’t Submerge Her Head Underwater
One important thing you need to remember whether you are washing your sex doll after having sex or even if you are just bonding with each other while enjoying a warm and relaxing bath is to not submerge her neck and head underwater.
By protecting her neck and head from soaking in water, you will keep her body dry and clean inside, and given that some sex dolls come equipped with an added heating system, submerging her head underwater can potentially damage the circuit.
https://www.jpdolls.com/goods/p663.html
Additionally, you need to protect her eyes, because the eyes are one of the most delicate features of a sex doll and the water can easily go inside the eyes and mess with your doll from the inside.
Gently Clean Her Face
If you want to clean her face while in the bath, you may very well do this safely by using a soft, non-abrasive loofah or a soft sponge dampened in warm water.
This isn’t a tricky part as the only thing you should pay attention to is not using fast and forceful, scrubbing moves as this can potentially cause skin damage and even tearing. Always be gentle with your doll.
https://www.jpdolls.com/goods/p719.html
Clean Her Orifices Carefully
If you had sex with your doll and now want to relax in a warm bath together, you should also use this time to clean her orifices carefully and prevent body fluids from remaining on her skin and potentially harboring bacteria and bad smell in the future.
This is not a complicated thing to do and if your doll has removable orifices you can carefully detach them and rinse them out with a mild, antibacterial soap.
On the other hand, if your doll’s orifices are built-in and can’t be removed, you should surely have a few extra items that can make the cleaning process easier for you.
Some of these are:
https://www.jpdolls.com/goods/p425.html
Vaginal irrigator – also known as douche or enema, this tool is often used as a preparation for anal sex but it is also an excellent tool to help you clean your sex doll. Using it is as simple as it gets and all you have to do is fill it up with a little bit of antibacterial soap and warm water and spray away.
Squirt bottle – similar to the vaginal irrigator, a squirt bottle is one of the most efficient and cheapest means of cleaning your doll’s orifices. It works totally the same as the vaginal irrigator and you can even make a DIY version and use it with a little bit of antibacterial soap and water.
Sponge on a stick – this is also something you can get creative with and make yourself a DIY version of it or you can go online and purchase one of these posh loofah sticks to safely clean your sex doll from the inside out.
Gently Pat Your Doll Dry After Taking a Bath With Her
Once you’re ready from the bath, don’t forget to gently pat your doll dry after taking her out of the water. Take your time and don’t rush this process as you want to make sure that no area of her body is left wet.
https://www.jpdolls.com/goods/p748.html
Additionally, supporting your sex doll with your hands while patting her dry is a little difficult, and propping her against the wall may be a risk as she may easily slip if she’s wet, fall, and get damaged.
You want to lay her down on the bathroom floor with a towel underneath her as to avoid scratching and damaging her skin and gently go over her with a dry cloth.
Don’t Forget To Powder Her, Too
Moreover, once you’ve patted her dry and she is still laying on the towel, you can also take this time to powder her body with a little bit of baby powder to make sure there isn’t any dampness left and also protect the material from becoming sticky.
Store Your Doll Somewhere Safe
Once you’re done and your companion is all nice and clean for the night, you can then store her in a dry and cool place, avoiding direct sunlight or being too close to the heating, and also away from freezing cold conditions such as the basement or the pantry, etc.
https://www.jpdolls.com/goods/p219.html
Your doll will be safest if stored in an adequate storage box, hanging inside the wardrobe, her original shipping box, or wrapped in a storage bag.
What Not To Do When Cleaning Or Bathing With Your Doll
As you already noticed from the tips mentioned above, bathing with your sex doll as well as cleaning her doesn’t require any out of the ordinary practice. It just needs a little bit of extra care and attention.
However, besides that, there are several things you absolutely shouldn’t do when cleaning or having a bath with your doll. Here are some of them:
Avoid using sharp objects or overly abrasive loofahs while cleaning or bathing with your doll as this may lead to puncturing and damaging her skin.
Do not apply too much pressure to your doll’s skin when cleaning her, bathing with her, or patting her dry as this can potentially lead to damages or tearings.
Don’t use a blow dryer to dry your doll as this will almost certainly cause some damage to her skin. Yes, these things have been done by some people, so our advice is don’t be lazy, pat her dry instead.https://www.jpdolls.com/goods/p452.html
Avoid using oils with your sex doll as oils can contribute to the degradation of both silicone and TPE materials.
From the author: I almost felt blasphemous, making this comic. Nintendo’s a company that has given me joy in times I’m not sure I otherwise would have survived. They have a special place in my heart, y’know? I mean, heck, their characters are all over my comics, site header, office desk and walls. But I take this one personally, for reasons that should be obvious, other than the fact that I believe it’s just generally a bad move for them to claim ad revenue on Let’s Plays.
Let’s Plays are a strange sort of gray area when this topic comes up; there are a handful of perfectly valid arguments all over the field, but I’m more on the side that sees LPs as heavily divergent products from the game they might be “infringing” upon. This is, of course, in the case of videos with commentary and video edits. LPs, sans commentary, feel a little more derivative, but still have the argument of not delivering the “full experience” one might receive from playing it on their own.
I mean, yes, these games are the publisher’s IP; they own and can do whatever they want with them, including telling others what they can and can’t do with them. Having said that, there’s a symbiotic relationship here: Put simply, it’s free advertising. Massively effective, free advertising. Personally, I can’t tell you the number of times people have messaged me or commented on a video telling me that they went out and bought the game I’ve been LPing because they wanted to play along with me or that I made it look fun. Money aside, it’s just a great community to be a part of. I’ve met so many kind, cool, amazing people through my videos. It’s brought me to be part of projects much larger than myself. But at its core, it’s a means to connect and share our gaming experiences in a camaraderie-eliciting sort of way that could only before be experienced with siblings, cousins, local friends or at the occassional convention. I never had any of these opportunities as a child, so Let’s Playing has granted me something precious.
But regardless of what it means to me or you, Nintendo’s recent actions are alienating at best. And if it causes a domino effect among publishers, you can expect LPs to either undergo MASSIVE change (think small numbers of publisher-sponsored Let’s Players) or simply go extinct. Either outcome is scary, considering how many people make a living from LPs. As of this writing, I have not made a penny off of my videos, so Nintendo’s particular way of going about this doesn’t affect me (for now). But thinking people like myself are in the clear is only a comfort if every other publisher follows the same route; publishers are still completely in their own right to flat-out remove the video, don’t forget.
At any rate, I don’t find Nintendo’s defense of “Oh, but we’re not taking the videos or producers down, we’re just taking their work and profiting from it.” My own videos take anywhere from 30 minutes to upwards of 3 hours, depending on how saucy I’m feeling in regards to edits. So y’know what? No, I wouldn’t say “no” to making a few bucks down the road. To be able to justify putting more time into something I enjoy that also brings others joy? Could you imagine a world? I could. And I want to live there, one day. Don’t get me wrong: as stated above, the community is amazing and I genuinely love recording and editing videos, but I’ve got a family to take care of. A hobby is a hobby, but 10-30 hours per week is increasingly difficult to justify to the missus and other family when there are bills to pay. If fun and community could pay the bills~…
But hey, at least they’re helping with the next Sonic game.
Let’s Plays are a strange sort of gray area when this topic comes up; there are a handful of perfectly valid arguments all over the field, but I’m more on the side that sees LPs as heavily divergent products from the game they might be “infringing” upon. This is, of course, in the case of videos with commentary and video edits. LPs, sans commentary, feel a little more derivative, but still have the argument of not delivering the “full experience” one might receive from playing it on their own.
I mean, yes, these games are the publisher’s IP; they own and can do whatever they want with them, including telling others what they can and can’t do with them. Having said that, there’s a symbiotic relationship here: Put simply, it’s free advertising. Massively effective, free advertising. Personally, I can’t tell you the number of times people have messaged me or commented on a video telling me that they went out and bought the game I’ve been LPing because they wanted to play along with me or that I made it look fun. Money aside, it’s just a great community to be a part of. I’ve met so many kind, cool, amazing people through my videos. It’s brought me to be part of projects much larger than myself. But at its core, it’s a means to connect and share our gaming experiences in a camaraderie-eliciting sort of way that could only before be experienced with siblings, cousins, local friends or at the occassional convention. I never had any of these opportunities as a child, so Let’s Playing has granted me something precious.
But regardless of what it means to me or you, Nintendo’s recent actions are alienating at best. And if it causes a domino effect among publishers, you can expect LPs to either undergo MASSIVE change (think small numbers of publisher-sponsored Let’s Players) or simply go extinct. Either outcome is scary, considering how many people make a living from LPs. As of this writing, I have not made a penny off of my videos, so Nintendo’s particular way of going about this doesn’t affect me (for now). But thinking people like myself are in the clear is only a comfort if every other publisher follows the same route; publishers are still completely in their own right to flat-out remove the video, don’t forget.
At any rate, I don’t find Nintendo’s defense of “Oh, but we’re not taking the videos or producers down, we’re just taking their work and profiting from it.” My own videos take anywhere from 30 minutes to upwards of 3 hours, depending on how saucy I’m feeling in regards to edits. So y’know what? No, I wouldn’t say “no” to making a few bucks down the road. To be able to justify putting more time into something I enjoy that also brings others joy? Could you imagine a world? I could. And I want to live there, one day. Don’t get me wrong: as stated above, the community is amazing and I genuinely love recording and editing videos, but I’ve got a family to take care of. A hobby is a hobby, but 10-30 hours per week is increasingly difficult to justify to the missus and other family when there are bills to pay. If fun and community could pay the bills~…
But hey, at least they’re helping with the next Sonic game.
Here we've collected best posts, arts, cartoons, memes related to difficult times (+1000 posts - difficult times)
Categories
fandoms
memes
